Upto 20% Off

en
USD
Orders Shipped Within Continental United States - Free Shipping Over $299
Orders Shipped Within Continental United States - Free Shipping Over $299
Orders Shipped Within Continental United States - Free Shipping Over $299
Orders Shipped Within Continental United States - Free Shipping Over $299
    Reviews

    5m Addressable RGB Strip Light | Pixel LED Strip Light | 120 LEDs p/m | 20 pixels p/m | 24V | IP20 | 14.8Wp/m | RGB

      (1 Reviews) | Write a review
    SKU: PIX-TD24-RGB-120-5M-V2
    Discontinued
    Starting at: $146.99
    • 30 Days Return
    • 5 Years Warranty
    Add to Wishlist
    Deliver between Sat,May,02 and Fri,May,08. order with 2days,9hrs and 31 min.

    Better suited to permanent installations in architectural and hospitality settings such as lobby displays and night clubs due to the lower 'resolution' of these tapes.

    Having less pixels means the animations aren't as highly defined which makes for less defined colour displays to be programmed.

    at 120 LEDs per metre, this tape is designed to reduce the amount of spotting but it won't be completely eliminated if used in shallow channels.

    This Toning Digital Pixel LED tape utilises the TM1804 IC Protocol, meaning it has a high PWM (Pulse Width Modulation) rate of 1500Hz and data transfer rate of up to 800kpbs. One of the advantages of the PWM rate is being able to film the tape at up to 50FPS and not see any visible flicker.

    Our LED Pixel tapes have been designed to surpass industry benchmarks. We ensure that our products use high quality materials and have a thicker copper than other LED pixel tapes on the market. Manufactured to the highest standards, our tapes are quality checked and assessed to ensure optimal compatibility with our range of pixel controllers.

    Thicker copper tracks offer more durability, better heat dissipation and improved current flow, all of which are vital factors towards achieving the best possible product. Heat dissipation is a critical safety issue when it comes to high density tapes, so we pay serious attention to the amount of copper we use on our tapes. Inferior PCB tapes commonly have a copper thickness of around one or two ounces, whereas we require our LED Pixel tape to have a 4oz copper.

    Product Specification
    Colour:    RGB
    Voltage:    24V
    Water Resistance:    IP20
    Length:16.4 ft (5 m)
    Watts Per Metre:    14.8 Watts p/m
    Amps per Metre:    0.6 Amps p/m
    Lumens Per Metre:    Red - 370lm | Green - 1640°Cm | Blue - 335lm
    CCT / Wavelength:    Red - 620-630nm | Green - 515-525nm | Blue - 460-470nm
    Tape Width:    10mm
    Cut Points:    50mm
    LEDs Per Metre:    120 LEDs p/m
    LEDs Per Pixel:    6 LEDs
    Pixels Per Metre:    20 Pixels p/m
    Control Type:    Digital Addressable
    IC Type:    TM1804
    Colour Resolution:    8 Bits
    PWM Rate:    300Hz
    PCB Colour:    Black
    PCB Weight:    4oz
    Min Operating Temperature:    -40°C
    Max. Operating Temperature:    50°C
    Guarantee:    2 Years
    Control Input Resolution (Bits):    8
    Ingress Protection (IP):    20
    Input Current Type (A):    DC
    Input Voltage Min. - Max (V):    24-24V
    Body Colour:    Black
    Cable Length (m):    500
    Copper Foil Weight (oz):    4
    Cut Points (mm):    50
    LEDs Per Metre (LEDs/m):    120
    Pixels Per Metre (Pixels/m):    20
    Product Height (mm):    2
    Depth (mm):    5000
    Product Weight (g):    160
    Width (mm):    10
    Battery Included:    No
    Operating Temperature Min. - Max. (°C):    -40℃ to 50℃
    Dimensions LxWxH (mm):    5000x10x2
    Family Name:    Pixel SMD
    Warranty (Years):    2
    Max. Run Length (m):    5
    Lumens Per Watt (Lm/W):    39
    Bend Direction:    Vertical
    Lumens Per Metre (Lm/m):    535
    Cable Length (mm):    500


    Show more reviews
    store image

    5m Addressable RGB Strip Light | Pixel LED Strip Light | 120 LEDs p/m | 20 pixels p/m | 24V | IP20 | 14.8Wp/m | RGB

    Part Number: PIX-TD24-RGB-120-5M-V2